What are the characteristics of FERRITE-CHECK 240 ferrite content detector

Easy to operate

The FERRITE-CHECK 240 ferrite content detector adopts a split design, which is easy to use. The instrument complies with the Basel standard DIN EN ISO 8249 and uses magnetic induction method to measure the ferrite content in austenitic steel and duplex steel.

New probe

High sampling rate, all signals from the probe are digitized to achieve interference free and accurate measurements. Accurate data, high repeatability, and a detection range as low as 0.2.

highlight

LCD color touch panel, easy to operate, with a resolution of 320x480 pixels. Equipped with a rubber protective cover, displaying the measurement results of FN or Fe%.

Measure the ferrite content in the weld seam

Especially for welded duplex steel, it is important to know whether the weld seam has sufficient ferrite content to ensure its strength. If the ferrite content is low, the weld seam is more prone to cracking when heated, but if the ferrite content is too high, the toughness and ductility of the weld seam will be lost.

Rapid and continuous measurement of ferrite content

The FERRITE-CHECK 240 ferrite content detector can accurately and quickly determine the ferrite content. When detecting welds on smooth or polished surfaces, the instrument can be switched to scanning mode. When the probe is placed on the surface and moved along the surface, the readings will be continuously stored and statistical data of the minimum, maximum, and average values of the measurement series will be displayed.

Calibrate the ferrite content detector

The FERRITE-CHECK 240 ferrite content detector is equipped with three calibration standard plates, which can be traced back to NIST

remote operation

The SCPI interface is implemented on the device, which allows the device to perform remote measurements and transmit measurement values during line operations. Connecting through USB also ensures continuous measurement of power supply.

data output

The instrument can communicate with Windows PC and use the Lima Connect application. The measurement results can be statistically evaluated and displayed in graphical form. The application is free of charge.

Technical Specifications