Main functions of Hengsheng HS2110 noise sensor

[Compliant with national standards] Compliant with IEC61672-1/2 level standards and GB 3096-2008 "Environmental Quality Standards for Noise"

【 Two outputs 】 Provides 4-20mA and RS485 outputs, or can choose 1-5V or 2-10V voltage output according to requirements

Easy to integrate: Connect controllers such as PC, PLC, DCS, etc. to easily obtain noise data

【 Compact size 】 With a diameter of 25mm and a length of 115mm, it can be installed in a very small space

【 Ultra wide power supply 】 The power supply supports 5-24V input

Durable and sturdy stainless steel casing, suitable for various harsh industrial environments.

Product Features

1. The HS2110 noise sensor is an industrial grade remote sound level meter that integrates a microphone, preamplifier, data acquisition card, and sound calibration, with a built-in DSP processor.

2. Without the need for any additional acquisition cards or signal conversion devices, the measured sound pressure level data can be directly output. A highly convenient fine noise measurement system that is compatible with control devices such as PLC, PC, DCS, etc.

3. The HS2110 noise sensor has a built-in calibration function, which uses a standard sound level calibrator (1kHz/94dB) to calibrate by long pressing the calibration contact.

4. The DB9 male adapter board for sensor delivery (marked with the pin definition of the wiring terminal data cable) is directly connected to the female port and fixed.

5. The HS2110 noise sensor is compact and easy to install. The sensor microphone diaphragm is made of titanium film (nickel plated film for sound level meters) and laser welded to ensure high stability and durability. Its performance has reached international standards (similar to BK company) and is suitable for use in various harsh industrial environments.

Technical Specifications: