FW80 high-speed crusher

1、 Purpose and structural characteristics:

The FW80 high-speed crusher is mainly used in scientific research units such as industry, agriculture, mining, medicine and health, coal geology, etc. It can crush various plants, medicines, soil, grains, sand and gravel (1-5mm), minerals, etc. to enhance the working time of the whole machine, improve the powder crushing process, and make it have higher crushing efficiency and quality. It is an ideal crushing equipment for various scientific research units

2、 Technical specifications:

Input voltage: 220V Motor power: 400W Rotation speed: 24000/minute Working chamber diameter: 80mm Volume: 110 * 270mm Continuous working time: within 10 minutes Weight: 3kg Blade material: stainless steel

3、 Instructions and guidelines for use:

1. Place the crushed sample into the crushing chamber, tighten the cover, and turn on the power to crush it.

2. Before taking the sample, cut off the power supply to prevent danger. The sample should not exceed 70 grams at a time and should be kept dry to avoid overloading and burning out the motor.

3. The continuous use time cannot exceed 10 minutes, with a 5-minute interval before continuing to use.

4. During normal operation, the upper cover of the casing is locked due to rotational force. If it cannot be opened, use a wooden or rubber stick to loosen the cover before lightly tapping or crushing it.

5. When the carbon brush and blade are severely worn out during long-term use, they should be replaced in a timely manner. When replacing, the power should be cut off and screws should be tightened, and all components should be checked for looseness at any time.

6. If the motor noise is too loud or it is difficult to start, the bearings should be replaced in a timely manner.

7. Attention must be paid to grounding.

4、 Random accessories:

8-10 stiff hands, 1 brush.