Welcome Customer !

Membership

Help

Beijing Yinglaike Technology Development Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Article

Beijing Yinglaike Technology Development Co., Ltd

  • E-mail

    dubin@inlucktech.com

  • Phone

    13691380165

  • Address

    Huawen International Media Building, No.1 Courtyard A, No. 15 Jianguo Road, Chaoyang District, Beijing

Contact Now
Advantages and disadvantages of reverse phase thin-layer chromatography plate
Date: 2025-07-14Read: 1
Reverse phase thin-layer chromatography plateThe different lengths of carbon chains determine the water phase ratio and retention performance in the solvent system used. As the carbon chain grows, the retention time also gradually increases.

Advantage:

1. Good separation effect: The ability to separate compounds with small polarity differences is superior to that of normal phase TLC.

2. High reproducibility: The bonded phase stationary phase has strong stability and small differences between batches.

3. Reusable: Some reverse phase plates can be reused multiple times after cleaning, reducing costs.

4. Strong correlation with HPLC: The separation conditions can be transferred to high-performance liquid chromatography (HPLC), which facilitates method development.

局限性:

1. Restricted separation of polar compounds: requires special treatment to be used under pure water conditions.

2. High dependence on environmental temperature: Temperature fluctuations may affect retention time and separation degree.

The services provided by our companyReverse phase thin-layer chromatography plateCharacteristics:

1. Thin layer chromatography plate containing bonded phases

2. The experimental results are highly dependent on the ambient temperature

3. Can use an aqueous two-phase system

4. Separation behavior is similar to that of liquid chromatography

5. Will not react with unstable substances in any way

Precautions for operation:

1. TLC plate quality: Ensure dryness, no contamination, avoid scratches or bubbles.

2. Sample preparation: The concentration should be accurate and the sample size should be stable (usually several to tens of micrograms).

3. Solvent selection: Adjust the solvent ratio according to the polarity of the compound to avoid interference from impurities.

4. Testing instruments: Use high-quality ultraviolet lamps or fluorescence detectors and calibrate them regularly.