Polymer material dryerIt is a specialized equipment used to remove moisture or solvents from polymer materials, with various types, outstanding technical characteristics, and wide applications. The following is a detailed introduction to the polymer material dryer:

　　Polymer material dryerWhat are the common types?

paddle dryer

Structure: Composed of a hollow shaft and wedge-shaped blades, the heat medium flows through the blades through the hollow shaft to achieve indirect heating.

Features: Low energy consumption, high heat transfer efficiency, strong self-cleaning function, suitable for drying slurry materials.

Boiling dryer (fluidized bed dryer)

Structure: Composed of air filter, heater, fluidized bed main unit, cyclone separator, bag filter, etc.

Features: Fast drying speed, wide particle size range, suitable for drying powdered or granular materials.

Spray dryer

Principle: Liquid materials are sprayed into tiny droplets through a high-speed rotating atomizer, which exchange heat with hot air to rapidly evaporate the moisture in the droplets.

Features: fast drying speed, good product uniformity, simple operation, suitable for drying polymer solution or lotion.

Disc type continuous dryer

Structure: Composed of multiple layers of drying discs, each layer of drying disc can be separately heated or cooled by introducing a heating medium or a cooling medium to the material.

Features: Easy to regulate, strong applicability, suitable for drying paste like and heat sensitive materials.

Polymer diaphragm dryer

Principle: Using a hollow special polymer membrane that can only allow water vapor to pass through but block oxygen and ammonia, a large amount of water vapor is carried out of the dryer through a small amount of compressed air passing through the membrane.

Features: No need to install a drain, dry compressed air can be obtained from the air outlet, suitable for occasions that require dry compressed air.