The NOXCANg module is a universal and highly intelligent NOX/Lambda/O2 measurement module. This module is installed on the engine exhaust pipe through a direct insertion NGK ceramic NOX sensor to measure NOX/Lambda/O2. All sensor parameters are output through CAN. Although designed as a measurement tool, NOXCANg can be integrated into engine or aftertreatment system control. Users can set up CAN to ensure that multiple modules can be used on the same bus. H: The fuel composition ratios of C, O: C, N: C, and H2 can be set. The sensor used with the NOXCANg module has a storage chip in its connector to store calibration data, so users can perform zero or span calibration on the sensor. PC software is used to set, control, calibrate, browse output and sensor parameters (requires CAN adapter, not included in NOxCANg ¬ module). Optional display head with analog output, used to connect one or two NOXCANg modules.