-
E-mail
alperm@163.com
- Phone
-
Address
103, 1st Floor, Building 5, No. 69 Fushi Road, Haidian District, Beijing
Beijing Jinkun Technology Co., Ltd
alperm@163.com
103, 1st Floor, Building 5, No. 69 Fushi Road, Haidian District, Beijing
Beijing Jinkun Technology Co., LtdThe RF optical module is used to convert RF signals into optical signals, transmit them through optical fibers, and then receive them at the receiving endOptical signals are converted into radio frequency signals, which have long distances, high bandwidths, and flat responses, and are used in communication and radar systems.
In satellite communication, point-to-point antennas can convert RF signals into optical signals through this device, and connect them to control rooms several meters to several kilometers away through optical fibers. Broadcast signals can also convert RF signals into optical signals and transmit them through optical fibers. The radar system can be used through this methodConnect the radar antenna and signal room over a long distance.
The RF fiber optic transmission module has different RF bandwidths of 8GHz, 15GHz, 20GHz, and 3GHz,Low frequency bands such as 2.4GHz and 1.5GHz can be selected for unidirectional and bidirectional transmission systems as needed.
RF optical module of Beijing Jinkun Technology Co., Ltdadvantage
1. high bandwidth
2. Electromagnetic Interference Resistance
3. Optional different light wavelengths of 1310nm/1490nm/1550nm
4. Anti surge power protection, reliable power environment adaptability
5. Adaptive temperature compensation capability, controlling the stable output of the light source.
6. Compact and small volume
7. Applicable to military industry standards
RF optical module of Beijing Jinkun Technology Co., LtdApplication scenarios
1. Radar antenna extended far away
2. Long distance RF signal transmission
3. Radio signal monitoring
4. GPSNavigation signal transmission coverage in Beidou or other formats
5. electronic countermeasure
RF optical module of Beijing Jinkun Technology Co., LtdParameter table:ROF060M
parameter name |
unit |
indicator value |
frequency range |
MHz |
200– 3000 |
Link gain |
dB |
About 0dB |
flatness |
dB |
≤ ± 3 |
Input 1dB compression point |
dBm |
≥ 0 |
VSWR |
NA |
≤ 2:1 |
The largest input RF signal |
dBm |
10 |
Noise Figure |
|
<30 |
phase noise |
dBc |
< -130@1MHz |
Input/output impedance |
Ohm |
50 |
power supply method |
VDC |
6~12V |
power consumption |
W |
<2(Single module) |
Laser operating wavelength |
nm |
1310/1550Or WDM |
Laser output power |
dBm |
0 |
Detector operating wavelength |
nm |
1100~1650 |
Fiber optic connector type |
NA |
FC/APC |
RF connector type |
NA |
SMA |
environmental parameters |
|
|
Volume size |
mm |
85*60*18 |
Beijing Jinkun Technology Co., LtdROF060MRF optical module
Committed to providing customers with precise, accurate, stable, and reliable optoelectronic products and solutions. Beijing Jinkun Technology Co., Ltd. mainly producesMicrowave fiber optic transmission module, RF fiber optic transmission module, RFfiber optic transceiver，Fiber optic delay line，High speed optical switch，Uniform light spot environmentWaiting for the product,!www.jonkon。。 ｃｏｍ.cn，www.jon-kon。。 ｃｏｍ。
:.