HebeisomeThe construction and operation of the underground pipe gallery in the new district are in full swing. With HaiyitechnologyThe management, operation, and maintenance issues faced by the comprehensive pipe gallery after its implementation have been well resolved.

The underground comprehensive pipe gallery is urbanbigArteries bring vitality to cities from the inside out, but due to the design of natural gas pipelines, power cables, urban water, wastewater, and urban garbage, real-time monitoring of the internal environment is necessary to fully ensure the safety of equipment and maintenance personnel in the pipeline corridor.

Hebei ProvinceThe main use in the pipe gallery project isHaiyiTechnology gas alarmMIC600seriesMIC600 is a six in one gas detector that can simultaneously detect six types of gases. In this project, the main focus is onUsed to monitor the levels of methane, carbon monoxide, hydrogen sulfide, and oxygen.

1. Oxygendetection

Oxygen sensors mainly monitor the oxygen content in the comprehensive pipe gallery, which is an important measure to ensure the safety production and protection of underground construction personnel and safety supervision personnel.

2. Methane gasdetection

The main purpose is to detect the combustible gas methane, which is the main component of flammable and explosive gases in natural gas pipelines. Therefore, it is installed at the interface of gas pipelines or in areas prone to leakage.

3. Hydrogen sulfidedetection

Hydrogen sulfide sensors are mainly used for detecting hydrogen sulfide gas generated by sewage pipelines in urban underground utility tunnels, as excessive hydrogen sulfide gas content can inevitably cause harm to human health.

4. Carbon monoxidedetection

According to the requirements of civil air defense, carbon monoxide gas sensors should be installed to timely monitor the toxic gas content in the comprehensive pipe gallery, improve the environment, and eliminate safety hazards.

The project adoptsHaiyitechnologyThe MIC600 gas detection alarm is installed and the monitoring signal is transmitted to the central control room (monitoring center) through communication. Analyze the data through the accompanying comprehensive management software. Through software or alarm host, the geographical location, measurement values or working status of each measuring point are continuously collected. If any abnormalities occur, the system will automatically generate alarms (audible and visual alarms, SMS alarms, email alarms are optional), notify relevant personnel in a timely manner, and eliminate possible dangers in the bud stage, avoiding major economic losses or personnel safety memory affecting the normal operation of the pipe gallery.