1. Please wear clean and dry work gloves when placing the sample.

2. During the heating test, the analyzer should pay more attention when working around the high-temperature furnace! If it comes into contact with a high-temperature furnace or crucible, it may cause serious burns. When placing or removing the crucible cover, be sure to wear work clothes and gloves.

3. When moving the analyzer, please first remove the balance inside the analyzer (refer to Chapter 5).

4. Before plugging or unplugging the online signal line or balance signal line, the power of the analyzer and computer must be turned off! Otherwise, it will damage the analyzer, balance, and computer!

5. When the analyzer is not in use for a long time, please keep it dry. It is recommended to heat the high-temperature furnace once before retesting.

6. The analyzer should be kept clean on a regular basis.

　　

The above are the precautions for using a lubricant pour point analyzer.