Xinjiang chemical enterprises have recognized our technical solutions and services for the German CMC trace water analyzer through technical exchanges and market research. Through communication with our customers from the manufacturer, recognition of our technical application and the professionalism of our technical personnel. All of our technical personnel have a bachelor's degree in chemical engineering and have over five years of technical service experience in the chemical industry. Provide on-site training on instrument application and precautions for customer users. To enable users to quickly grasp how to better utilize equipment and provide certain technical support in winter due to low external temperatures.

German CMC TMA-202 \ \ TMA-210 \ \ - TMA-204 Trace Water AnalyzerIt is produced and developed by German CMC Instrument Company, which is an international manufacturer of P2O5 electrolytic trace water analyzers and gas generators. Its products are widely used in chemical, pharmaceutical, petroleum, automotive, research and development laboratories, especially in industries such as chlor alkali, polycrystalline silicon, air separation, and gas pipeline transportation. TMA is suitable for analysis Xe、Ar、Kr、He、D2、F2、N2、H2、O2、O3、HBr、PH3、SF6、Freon、C2H2、CO2、CH4、Natural gas。

Technical advantages:

• Suitable for moisture analysis of corrosive gases and flammable gases

• Ultra fast response

• high sensitivity

• Fully microprocessor controlled

• Automatic range switching

• Self diagnostic function

• Compliant with NAMUR standards

  
  

  
  

  
  

  
  

  Analysis principle:The pentoxide phosphorus sensor uses the principle of electrolyzing water molecules into hydrogen and oxygen. This sensor consists of a glass cylinder and two parallel electrodes. The electrode material is selected according to the specific application (usually made of platinum or rhodium metal wire), and a thin layer of phosphoric acid H3PO4 film is coated between the two electrodes. The electrolysis current appearing between the two electrodes decomposes the water in the acid into H2 and O2, and the product of this process is pentoxide phosphorus. P2O5 is a highly hygroscopic substance, so it absorbs water from the sample gas. Through a continuous electrolysis process, a balance is established between the water content of the sample gas and the water content after electrolysis. The electrolysis current is proportional to the water content in the sample gas, and the signal is transmitted through the internal signal of the instrument. Amplifier processing, followed by display and data readout. This principle is suitable for analysis Xe、Ar、Kr、He、D2、F2、N2、H2、O2、O3、HBr、PH3、SF6、Freon、C2H2、CO2、CH4、Natural gas， Especially suitable for measuring trace moisture in high-purity acidic gases such as Cl2, HCl, SO2, H2S, etc. (except for a few gases that undergo chemical reactions with phosphoric acid).

  
  

Technical Specifications:

Range: 0-10/100/1000/2500ppm/v (automatic range switching)
Accuracy: 1% of the full range
Sensitivity: 0.1% of the full range
Analog output: 4-20mA
Display: Multi functional high-definition LCD display
Sample gas flow rate: 20Nl/h
Suggested pressure: 0.1-0.5 barg
Sample gas temperature: 5-150 ℃
Response time:<1 second
T50 response:<8 seconds
Environmental temperature: 5-65 ℃
Cable: 3 meters standard, up to 300 meters optional
Dimensions: Width 363mm x Height 115mm x Depth 377mm (portable) TMA-210-P;
Width 482mm x Height 133mm x Depth 450mm (Rack mounted) TMA-202-19 \ \ TMA-202-19-EX
Width 300mm x height 260mm x depth 280mm (wall mounted); TMA-202-W
Width 257mm x Height 160mm x Depth 316mm (desktop) TMA-202-P