The DK PL010 series oil stability and compatibility analyzer specially designed for the shipbuilding industry by Beijing Duketec Technology Co., Ltd. This device focuses on the core pain points of fuel use during ship navigation, with precise detection, efficient operation, and comprehensive protection as its core advantages. With technical strength that meets international standards, it provides ship operators with solutions for fuel stability and compatibility, helping the industry avoid fuel related risks and reduce operating costs.

Directly targeting industry pain points and building a solid defense line for fuel safety

The current shipbuilding industry is facing challenges in the application of various fuels such as ultra-low sulfur fuel oil and biofuels, with frequent issues such as insufficient fuel stability and poor mixing compatibility. These problems can easily lead to asphalt precipitation, equipment blockage, engine failure, fuel supply interruption and other serious consequences, not only causing high maintenance costs, but also potentially causing chain losses such as shipping delays and increased demurrage fees.

The launch of DK PL010 series oil stability and compatibility analyzer has accurately solved this industry problem. As the core product of Duktech's deep cultivation in the field of oil testing, this equipment complies with the ASTM D7112 standardized testing method. After deep cooperation and iteration with customers, it has achieved comprehensive upgrades in reliability, usability, and customer support, becoming a "powerful assistant" for ship fuel safety testing.

Core technology highlights, empowering precise detection

Full scene adaptation, no blind spots detected

Compared with similar products, the DK PL010 series analyzer exhibits strong adaptability. It can not only accurately analyze fuels with high asphalt content, but also break through technological limitations to perform stability and compatibility testing on fuels with extremely low asphalt content. At the same time, it is compatible with measuring mixing parameters of fuels without asphalt content, comprehensively covering commonly used fuel types for ships and avoiding detection omissions caused by differences in fuel characteristics.

Multi parameter output, data supports scientific decision-making

The equipment uses heptane automatic titration and visible light scattering optical detection technology to accurately capture the inflection point of the titration curve (asphaltene precipitation point) and output a complete set of core parameters, including stability P value, solvent equivalent FR5/1, solubility blending value SBN, and insoluble matter value IN. These parameters comprehensively characterize the storage life and mixing compatibility of fuel, providing scientific data support for fuel procurement, mixing ratio optimization, and inventory management.

Automated operation, efficient and convenient cost reduction

The analyzer adopts a friendly sample preparation process and automated analysis design, significantly reducing manual intervention. The measurement process is clear and efficient: First, mix 20 grams of xylene with 40 grams of oil sample and shake for 60 seconds to prepare the mother liquor. Then, take different weights of mother liquor and place them on a sample turntable with heating function at 4 positions. The equipment automatically prepares three different dilution ratio mixtures and completes titration detection. The entire cycle usually takes only 45 minutes, and the maximum critical time is 90 minutes. The rapid screening mode can also automatically determine the operating parameters of unknown samples, which can minimize operational errors and time costs.

Multi dimensional core advantages, safeguarding navigation safety and efficiency

1. Risk pre prevention and controlBefore refueling, the compatibility and stability testing of the existing fuel and newly introduced fuel in the fuel tank can be completed to avoid equipment failures and cost delays caused by inferior or incompatible fuel in advance, and to prevent loss of propulsionRisk.

2. Optimization of operating costsBy accurately optimizing the fuel mixing ratio, the amount of sludge generated and the subsequent cleaning and processing costs are significantly reduced, reducing the time and cost of unplanned maintenance and tank cleaning. At the same time, the efficiency of separators and filters is improved, fuel consumption is optimized, and accurate calculation of ship carbon intensity index (CCI) is assisted.

3. Easy to use and maintainThe equipment adopts a non-contact design, which is easy to install and calibrate. It automatically cleans after each testing program, reducing maintenance workload. Duktech also provides a complete set of consumables (prisms, pumps, solvents, sample bottles, etc.) and professional technical support to ensure the reproducibility and reliability of test results.

4. Flexible adaptation to different scenariosCompatible with 110 or 230V, 50/60Hz power supply, weighing only 38kg, with dimensions of H453mm × W585mm × D464mm, compact and portable, can flexibly adapt to different usage scenarios such as ships and onshore receiving facilities.

Empowering the shipping industry and creating a safe and efficient future for navigation

The launch of the DK PL010 series oil stability and compatibility analyzer not only fills the technical gap in the precise detection of fuel in the shipbuilding industry, but also builds a solid safety defense line for ship operators through the core values of "advance prediction, scientific optimization, cost reduction and efficiency improvement". Whether it is to avoid delay risks, reduce engine failures, improve fuel utilization efficiency, or reduce comprehensive operating costs, this equipment will become an important support for the high-quality development of the shipbuilding industry.

Beijing Duktech Technology Co., Ltd. has always been customer-oriented, providing high-quality oil testing solutions for customers in the shipbuilding industry with professional technical research and comprehensive service guarantees.