Recently, our company has launched a new product: nuclear medicine radioactivity meter

1. Meet the requirements of GB/T 10256-2013, JJG 377-2019 national standards and verification regulations.

2. Measurable nuclear medicine commonly used nuclides^99mTc、¹³¹I、⁶⁷Ga、²⁰¹T1 and othersPhoton radiation energyThe quantity range is 25-3000 KeV;

3. Measurable nuclear medicine in vivo therapeutic isotopes¹⁵³Sm、⁹⁰Y、¹⁸⁶Re and positron isotopes¹⁸F、¹⁵O、¹³N, etc;

4. 10.1-inch color capacitive touch screen display, convenient for reading, easy to operate, clear at a glance, sensitive to touch, can be operated with medical gloves;

5. Support both Chinese and English operating interfaces;

6Under normal working and living conditions [ambient temperature:-20℃-40℃； Relative humidity: ≤ 90%, the reading remains stable and is not affected by temperature and humidity;

7Common nuclides can be freely set and adjusted according to usage needs to increase work efficiencyUsers can build their own nuclide library according to their needs, with a capacity of over 100 nuclide libraries and measurement requirements;

8Equipped with dedicated nuclide measurement containers to accurately locate the measured nuclides in the ionization chamber and reduce measurement errors;

9Press the button to automatically deduct the environmental radiation background without the need for zero adjustment;

10Insert the sample, automatically perform measurement and range conversion, and can also be manually switchedCi/Bq unit display, fast and accurate measurement;

11Type in the calibration coefficients for modifying and solidifying nuclides without the need for development tools;

12Optional printer can print and output nuclide activity measurement reports;

13、Computers in ChineseWindowsOn the platform, throughModbusThe protocol reads the activity concentration value, activity unit, and nuclide label of the activity meter, and can set the serial port address and scanning rate by oneself. Can communicate and connect with domestic packaging equipment.

14Energy Range:X, γ and β nuclides above 25KeV and 1MeV respectively;

15. Range: 0.01uCI-10Ci (99mTc);

16. Measurement accuracy: Display resolution of 0.01uCi;

17. Linear: ± 2%;

18. Repetitive error: ± 1%;

19Measurement speed: typical time≤3Seconds;

20Display unit: Curie can be used（There are two methods: Ci or Bq;

21Geometric response: sample axial variation2cm， Reading variation ± 0.5%;

22Response time: ReadingAt 95%, the typical time is3Seconds;

23Communication method:RS232、RS485；

24Power supply voltage:AC220±15%、50HZ±2%（6W）；

25Ionization chambersize： 14.5Mm (diameter) ×32 mm (height) 6.7kg

26Host size: Long282mm x 191mm x 60mm x 1.5kg