Beijing Century SenlangElectrochemical Corrosion Test ReactorThe series is a reaction equipment designed to meet the needs of users in laboratory electrochemical corrosion research experiments. As a professional electrochemical reaction system under high pressure, high temperature, and strong corrosion environment, its structural design and functional configuration fully adapt to the corrosion testing requirements under conditions. It can accurately simulate real working conditions such as oil and gas fields, marine environments, and chemical processes, providing reliable data support for material selection, corrosion inhibitor development, coating evaluation, etc. It is the core equipment for corrosion science research and industrial anti-corrosion technology development. Corrosion testing experiments, also known as aging experiments, are used for corrosion testing of samples in high temperature, high pressure, electrochemical, dynamic or static high pressure and high temperature reaction systems, and are mostly used in metals, rubber, and new material systems. In static corrosion, the determination of static corrosion rate and corrosion inhibition rate. The corrosion experiment of materials in liquid media generally has a long cycle, and a large amount of heat and gas may be released during the corrosion process, which has a great impact on the safety and stability of the corrosion reactor operation. The Senlang reactor has mature technology and rich case studies in this experimental system.

Characteristics of Electrochemical Corrosion Testing Reactor ProductsElectric lifting system for kettle head; Touch screen control system; Pressure digital display; Temperature, speed, pressure, and torque curves are displayed; Two way temperature detection, overtemperature and overpressure fault sound and light alarm system; Quick disassembly structure of reaction kettle.

Electrochemical corrosion testing reactor, reactor equipment parameters:

1The parameters of the. 1SLZ-3L reactor are as follows:

1.1.1 Floor standing, fixed kettle body, electric lid lifting, kettle body flipping and material pouring.

1.1.2 Reactor capacity: 3L.

1.1.3 The kettle cover, kettle body material, and internal components are all made of 316L stainless steel material.

1.1.4 Mixing driver, material: Hastelloy C276 material.

1.1.5 Sample holder, material: Hastelloy C276 material (refer to the design drawing for details).

1.1.6 Quartz lining: 3L.

1.1.7 PTFE material sealing gasket, quick opening snap ring sealing structure, A-type double line seal.

1.1.8 Design pressure: 10MPa, working pressure: 8MPa, design temperature: 350 ℃, working temperature: 0~280 ℃.

1.1.9 The kettle cover is equipped with:

(1) Pressure tap: connected to a four-way pointer pressure gauge, pressure sensor, and bursting valve.

(2) Temperature measuring port: made of Hastelloy C276 material and K-type thermocouple (3mm), used for reaction temperature measurement.

(3) Air intake: equipped with a 6mm card sleeve right angle needle valve, used for air intake

(4) Exhaust port: equipped with a 6mm card sleeve right angle needle valve for exhaust.

(5) Working electrode: The primary electrode used for the occurrence of target electrochemical reactions, such as oxidation or reduction.

(6) Reference electrode port; Provide a stable potential reference for precise measurement or control of the potential of the working electrode.

(7) Auxiliary electrode port; Construct a current circuit to balance the charge transfer on the working electrode.

(8) Mixing port: Magnetic coupling driven mechanical mixer with shaft and stirring blade, push type stirring blade, made of Hastelloy C276 material.

1.1.10 Direct mixing drive motor: Stepless speed regulation: 0-800r/min, the motor has a fixed speed adjustable, and the medium fully reacts.

1.1.11 Mixing speed control, with a speed control accuracy of ± 1r/min.

1.1.12 Pressure digital display and overpressure protection module, with pressure sensor.

1.1.13 Metal insulated electric heating furnace, heating power 2.5KW

1.1.14 MRSC-AUTO touch screen fully automatic control system: Bidirectional communication cable, realizing temperature and speed control, as well as temperature/speed/pressure/torque/timing data storage and acquisition, and providing report form recording data and alarm recording function.

1.1.15 Identity recognition system, graded control.

1.1.16 Seven inch high brightness TFT LCD touch screen, displaying rich and comprehensive content without any blind spots in the field of view.

1.1.17 Real time online curve display of pressure, temperature, speed, torque, and alarm timing.

1.1.18 Automatic storage of experimental data with built-in data recording function, capable of displaying real-time and historical data.

1.1.19 Equipped with USB drive export function, which can be further analyzed and processed on the computer. Facilitating the long-term storage of experimental data for use in academic research papers.

1.1.20 Power configuration: 200-240 V/AC, 50-60 Hz.