Solid insulation material volume surface resistivity testerMain standards:

GB/T 1410-2006Test method for volume resistivity and surface resistivity of solid insulation materials

GB1672-8 Determination of volume resistivity of liquid plasticizers

GB 12014 Anti static Work Clothes

GB/T 20991-2007 Test Methods for Personal Protective Equipment Shoes

GB 4385-1995 Technical Requirements for Anti static Shoes and Conductive Shoes

GB 12158-2006 General Guidelines for Preventing Static Electricity Accidents

GB 4655-2003 Safety Regulations for Static Electricity in Rubber Industry

GB/T 1692-2008 Determination of Insulation Resistance of Vulcanized Rubber

GB/T 12703.6-2010 Evaluation of Electrostatic Properties of Textiles Part 6 Fiber Leakage Resistance

GB 13348-2009 Safety Regulations for Static Electricity of Liquid Petroleum Products

GB/T 15738-2008 Test Method for Electrical Resistance of Conductive and Antistatic Fiber Reinforced Plastics

GB/T 18044-2008 Carpet Static Behavior Evaluation Method Walking Test

GB/T 18864-2002 Limits of electrical resistance for antistatic and conductive products used in vulcanized rubber industry

GB/T 22042-2008 Test method for surface resistivity of anti-static performance of clothing

GB/T 22043-2008 Test Method for Antistatic Performance of Clothing by Resistance (Vertical Resistance) of Materials

GB/T 24249-2009 Anti static Clean Fabric

GB 26539-2011 Antistatic Ceramic Tile

GB/T 26825-2011 Anti static and Anti corrosion Adhesive

GB 50515-2010 Code for Design of Conductive (Anti static) Grounds

GB 50611-2010 Code for Design of Anti static Electrical Engineering for Electronic Engineering

GJB 105-1998-Z Electronic Product Anti static Discharge Control Manual

GJB 3007A-2009 Technical Requirements for Anti static Working Areas

GJB 5104-2004 General Requirements for Anti static Coatings and Static Performance of Radio Fuze Wind Hats

Solid insulation material volume surface resistivity testerTechnical Specifications:

Test voltage (V) 10 50 100 250 500 1000

Resistance measurement range: 1 × 104 Ω~1 × 1018 Ω;

Current measurement range 2 × 10-4A to 1 × 10-16A;

Solid insulation material volume surface resistivity testerTerms of Use

① Environmental temperature:0～40℃

② Relative temperature: ≤ 70%

③ Power supply current: AC 220V ± 10% 50Hz

①DC high voltage current output 10, 50, 100, 500, 1000 V five levels

②Select the appropriate range magnification based on the resistance value and DC high voltage value of the sample.

③High input impedance DC amplifier (input impedance>1015 Ω)

④Indicating instrument, indicating the measured insulation resistance.

⑤Power supply for various parts of the instrument.