1： Purpose:

The horizontal and vertical combustion tester is used to determine the degree of damage to the sample, as well as the linear combustion rate and residual flame/ignition time of the sample. Used for conducting horizontal and vertical flammability tests on plastic components of electrical equipment and appliances. The product casing is coated with iron plates (stainless steel casing is optional) and equipped with a combustible gas leakage alarm device (domestic *). It is also equipped with a large transparent observation window and a digital display for combustion, residual flame, and residual burning time. The device has a beautiful appearance, is easy to use, and has reliable performance. The test products include plastic parts for household appliances, lighting, electronic products, engineering plastics, rubber materials, and so on.

2： Compliant with standards

The horizontal and vertical combustion tester is designed and manufactured according to the requirements of standards such as IEC60950-1, UL94, IEC60707, IEC60695-2-2, GB5169, ISO1210, etc.

3： Technical indicators

1. Bensheng lamp head: inner diameter 9.5mm ± 0.3mm, length approximately 100mm ± 10mm from the air inlet upwards;
   2. Burner angle: 0~45 ° (manually adjustable, with scale);
   3. Ignite the cushion plate: standard medical cotton;
   4. Combustion gas: 98% methane standard gas or 37MJ/m3 ± 1MJ/m3 natural gas or propane (gas self provided);
   5. Gas flame temperature gradient: from 100 ℃± 5 ℃～ 700 ℃± 3 ℃, it takes 44s ± 2.0s or 54s ± 2.0s, or according to customized standard requirements (verified by temperature calibration device);
   6. Temperature calibration verification device: imported instrument automatic control, equipped with standard copper head (optional) with diameter of 5.5mm, 1.76 ± 0.01g or diameter of 9mm, 10.00 ± 0.05g;
   7. Thermocouple for temperature calibration verification: Ø 0.5mm, K-type, imported insulated high-temperature armored thermocouple (optional);
   8. Test time and holding time: 1s-999.9s (digital display can be preset);
   9. Repeated ignition times: 1 to 9999 times (digital display can be preset);
   10. Adopting an automatic ignition device to facilitate automatic testing;
   11. Internal volume of the box: 0.75m3 (optional 0.5M3 and 1M3);
   12. Dimensions: Width 1330mm * Depth 730mm * Height 1500mm;
   13. Box material: Iron plate spray coating;
   14. Exhaust hole: Ø 100mm;
   15. Input power supply: AC 220V 50HZ 5A.

16.The entire product line comes standard with a gas leak alarm device, which is safe and reliable.