High speed freeze centrifugeWidely applicable to industries such as teaching, scientific research, biochemical products, medical inspection, food safety, agricultural product testing, animal husbandry and aquatic product testing, microbiology, molecular chemistry, environmental protection, quality inspection, etc.
Microcomputer control, preset: centrifugal force, speed, centrifugal time, working program, and synchronized display with rotor model LED.
Equipped with at set rpm function: allowing users to obtain reproducible results and improving the comparability of centrifuges.
20 work program options, users can freely program and call their set work parameters to avoid duplicate settings and improve work efficiency.
Automatic balancing, unbalance protection, sound signal prompt in case of error or unbalance; Automatic imbalance recognition.
Countdown less than 1 minute, displayed in seconds.
Brushless AC variable frequency motor drive, no maintenance required.
Motor abnormality:
Not starting:
Check the power cord/socket connection (replace damaged plug)
Test the fuse tube (1A/2A specifications) and replace it if it burns out
The band switch is damaged and needs to be re soldered or replaced
Insufficient rotational speed:
Bearing oil shortage or contamination: Clean and add lubricating grease
Carbon brush wear: replace with carbon brush of the same model
Daily operations:
After each operation, remove the rotor and dry the water stains in the chamber.
Check for cracks before using the centrifuge tube (do not use damaged tubes).
The vacuum pump is replaced with specialized lubricating oil every year.
Clean the condenser dust (improve heat dissipation efficiency).