-
E-mail
spectrosci.sales.china@ametek.com
-
Phone
13269967574
-
Address
Room 211, Building 1, Hongdalide Industrial Park, Beijing Economic and Technological Development Zone
Amitex Pai Chao Technology Company
Speechao Technology successfully participated in the 10th China Enterprise Lubrication Management Summit Forum!
Date: 2023-05-22Read: 1
May 18-19, 2023The 10th China Enterprise Lubrication Management Summit Forum (2023 CELMF) was held in Guangzhou. As a strong brand in the global oil monitoring field, Speechao Technology was invited to attend the conference as an exhibitor and give a presentation at the conference.
Exhibition information
MiniLab 153 Industrial Field Oil Monitoring System
MiniLab 153 Industrial Equipment Comprehensive Oil Monitoring Laboratory can conduct comprehensive on-site oil analysis through four simple testing modules.
Elemental analysis
The oil sample consumption is about 3ml, with a detection time of 30 seconds
24 to 31 elements (PPM)
Oil samples do not require pre-treatment or chemical reagents
Grain analysis
The oil sample consumption is about 10ml, and all tests can be completed within 4 minutes
Particle counting, abrasive particle classification (intelligent ferrography)
Size, quantity, and concentration distribution of ferromagnetic particles (iron content analysis, direct reading iron spectrum)
Physicochemical indicators
The oil sample consumption is about 50ul, and the detection time is 1 minute
Moisture, TAN/TBN, oxidation degree, nitrification degree, sulfurization degree, soot, etc
No need for organic solvents
kinematic viscosity
The oil sample consumption is about 60ul, with a detection time of 0.5-5 minutes
40 ℃ kinematic viscosity (measured), 100 ℃ kinematic viscosity (calculated)
No need for organic solvents
FieldLab 58C Portable On site Oil Monitoring System
FieldLab 58C is a battery powered integrated oil analysis system that provides fast and comprehensive oil analysis on-site.
Easy to use
No need for solvents or reagents, requiring less sample size
The interface is intuitive and easy to operate, minimizing the introduction of errors caused by misoperation
Built in operation video, convenient for users to use
Portable on-site
Sturdy structure, battery charging, suitable for on-site use
4 detection modules integrated into one transport box
X-ray Fluorescence Element Analysis Spectral Module
Filter membrane pressure difference method particleCounting module
Infrared spectroscopy module
Motion viscosity module (40 ° C)
Comprehensive detection parameters
Can complete 4 module tests within 10 minutes, obtaining up to 20+detection parameters
Testing only consumes 12ml of oil sample
Complies with ASTM standards
Intelligent diagnosis, alarm limit supports custom settings
Touch screen interface design, built-in oil diagnosis and management software
The oil analysis report is clear and easy to understand, with diagnostic results and maintenance recommendations
Alarm limits for common rotating equipment components built-in
Users can customize alarm limits and diagnostic settings, and continuously improve them